Powered By:
nBlue™
Wireless SensorBug (pictured right) |
||
BR-BUTTON-S3A (70KB) SensorBug™ |
||
Contains BR-LE4.0-S3A BLE nBlue module |
||
3-Axis accelerometer (±2, 4, 8, 16g) |
||
16-bit Light sensor 0-64000 LUX |
||
13-bit Temp sensor -40*C to +85*C (±0.5*C) |
||
12-bit ADC on PCB test point |
||
CR2032 3.0 volt lithium coin battery and holder on bottom |
||
Two push button control, and two status LEDs |
||
PCB is 1" diameter (25mm) |
||
Battery serviceable water resistant plastic case |
||
Remote RF configuration and priograming. |
||
Free iOS 7 smart phone application: |
SensorBug Interface Specification v1.2.0.0a (2MB)
SensorBug Interface Specification v1.3.0.0a (2MB)
Can be easily configured to advertise as iBeacons, AltBeacons, or Eddystone protocol to support immediate, near, and far proximity ranges.
Samples of the SensorBug and the KeyFob must be purchased through Amazon or www.BLEhome.com.
Available at Amazon, click here to purchase
or
Buy online at www.BLEhome.com, click here to purchase |
BR-IND-SEN-LE4.0-S3A (Industrial version) |
||
Main circuit board electronics and battery fits into industrial ABS black or white plastic box below: 52.832 mm X 32.512mm X 11.430mm (2.080” X 1.280” X 0.450”) |
||
EXAMPLE APPLICATIONS |
||
Use 3-axis accelerometer to sense garage or side door entrance open, closed, or movement. Also mount on glass windows for glass breakage detection. |
||
ADC to detect presence of water |
||
Temperature logging and alerting |
||
Sensor for detecting if lights are left on |
||
Asset tracking of shipping containers and to monitor environments in transit. |
||
Find Device™ |
BR-FOB-SEN-LE4.0-S3A (121KB) nSensor™ |
||
Contains BR-LE4.0-S3A BLE nBlue module |
||
3-Axis, 12 bit accelerometer with selectable range of (±2, 4, 8, 16g) |
||
16-bit light sensor with selectable resolution and range of 1k,4k,16k,64k (0-64000 LUX) |
||
13-bit temperature sensor with range of -40°C to +85°C (±0.5°C) |
||
1 12-bit ADC channel available on a test point |
||
CR2032 coin battery holder |
||
Two push button control and two status LEDs |
||
Remote RF configuration and priograming. |
||
Free iOS 7 smart phone application: |